Windows Cleaning with a Pressure Washer.
Window cleaning is a duty that is required in many homes, despite the fact that it may be boring and time-consuming to do. You will be able to get a shine on your windows that is impossible to get by hand if you use a pressure washer, which will also speed up the cleaning process.
When utilizing a pressure washer to clean windows, however, you really must exercise extreme caution. The best technique to clean windows with a pressure washer is discussed in this article, along with other helpful hints and suggestions.
Instructions for Using a Pressure Washer to Clean Windows
It is possible to summarize the process in five phases.
1) Give your windows a thorough inspection to make sure there are no problems.
To begin, examine the condition of the windows themselves, including the paint, the glass, the glazing, and any caulking that may be present. Check that everything, including the paint, is in excellent shape before you buy it (which should not be chipping). Before you start cleaning your windows, you will want to be sure that any necessary repairs have been completed first.
2) Make use of a garden hose to saturate the ground and the plants that are located underneath your windows with water.
You need to make sure that the soap is diluted before the plants and soil have a chance to take it in as it runs down the windows since you are going to be using soap to clean the windows. The application of water in advance helps achieve this goal.
If you water the plants that are located underneath your windows, it will assist prevent those plants from harm.
Proceed to refill the soap reservoir, and at the same time, adjust the amount of pressure that is being applied.
Fill the soap reservoir of your pressure washer using a soap that is specifically designed for use in pressure washers. This information should be found on the soap’s packaging. In addition to this, make sure that you select a tip that has a broad spray pattern, and adjust the pressure so that it is low (ideally 1500 PSI, but 2000 PSI will work also). Always get started with the very lowest pressure imaginable.
Use a soap tip, which is often supplied with your pressure washer, to clean your windows.
Find the end of your bar of soap, attach it, and start using it. This one-of-a-kind nozzle, which is included as standard equipment on the vast majority of pressure washers and is designed for applying soaps and degreasers,
After applying the soap, wait one minute, then rinse it off your windows so that it doesn’t have a chance to dry before you use them again.
When you apply it, make sure that you hold the wand at a 45-degree angle to the window. This will help to reduce the force of the stream while maintaining its ability to remove dirt effectively.
Things to Think About Before Purchasing a Pressure Washer in Order to Clean Windows
When shopping for a pressure washer, there are a few considerations that should not be overlooked, despite the fact that certain tasks, such as window washing, may seem self-explanatory. The following is what we have found to be the most effective method for ensuring that homeowners make the best possible selection.
Window cleaning is easiest to do with an electric pressure washer, but you may also use one that runs on gas.
The reason for this is due to the fact that electric pressure washers are often not as forceful as gas versions, and when you are cleaning windows, you are working with a material that is easily damaged.
On the other hand, if you want to use your washer for tough jobs, you will probably want to go with a gas-powered power washer that offers a higher level of power than what electric versions are able to produce. This is because gas-powered power washers are able to produce more force than electric versions.
Cleaning windows with a gas pressure washer is possible, but doing it safely requires extreme caution.
You won’t be able to get by without a soap reservoir, seeing as how it is not only practical but also essential.
Even though it is quite unusual, it is nevertheless feasible to purchase a pressure washer that does not have a tank for soap. A soap reservoir is something you will want to have since it will speed up the process and save you a ton of effort that you would have to perform by hand otherwise.
How to Get the Most Out of Your Pressure Washer When Cleaning Your Windows
The following are a few pointers that we have put into practice at our own residences and that we considered would be helpful to our readers who were considering purchasing a pressure washer to clean their windows.
Always begin spraying at a lower pressure and wider angle, and then modify it as necessary. You may always raise the pressure as you go, but once the damage has been inflicted, you won’t be able to undo it. Consider it this way: it is always preferable to play things safe than to risk getting into trouble.
Before you use a pressure washer on your windows, it would be in your best interest to check the caulking and reapply it if it looks to be old or isn’t doing its job correctly. If you notice that the caulk is not sealing well or is showing signs of age, all you need to do is remove the old caulk and apply a fresh bead in the area.
You may use dish soap, but cleansers that state they can also be used for windows and are declared safe for pressure washers will give you the greatest results. When they are appropriate, you will see the following characteristics indicated on the label:
What Kind of Window Cleaning Nozzle Should You Use with Your Pressure Washer?
When it comes to cleaning windows, the performance of the 40-degree tip seems to be superior to that of other pressure washer tips since it directs the stream of water with a lesser amount of power than other tips. If you reduce the quantity any more, you will have to spray it on with a greater power, which may result in damage to your windows.
When Using a Pressure Washer to Clean Windows, What PSI Is the Most Effective?
The sweet spot for pressure washers designed for cleaning windows is between 1,200 and 2,000 pounds per square inch (PSI). Glass is susceptible to shattering, and it doesn’t take much for wood to get warped.
You are free to make use of the higher-powered pressure washers; but, while you are doing so, you will need to exercise a greater degree of caution in order to guarantee that their usage will be an asset rather than a liability.
Things That Should Be Avoided at All Costs When Cleaning Windows with a Pressure Washer
When using a pressure washer to clean your windows, there are a few things you need to keep in mind to ensure everything is done correctly and without incident. After all, it is a business that operates under a great deal of strain, and making certain errors might result in financial loss.
Always be aware of how far away you should be from the surface that is being sprayed. This may be accomplished by selecting a test location that is not visible to the majority of people. You may always begin at a greater distance and work your way closer in order to determine the optimal starting point. However, if you begin at a distance that is too great, the harm may be permanent.
It is important to not overlook the user manual since it is well worth the additional effort required to read it. Although each pressure washer is unique, they always have an instruction handbook for the user.
This will provide you with all of the information that you want on the operation, the warranty, and the maintenance. Get informed from the beginning if you want your pressure washer to last a long time and if you don’t want to have any troubles when you use it.
If you can help it, avoid using ladders at all costs; safety first! You can reach high places without having to lift your feet off the ground if you make use of the telescopic wand attachments that are available to purchase.
You will want to remove ladders and pressure washers from the scenario if it is at all feasible to do so given the inherent dangers of both of these items. Pressure washers may and do kick back.
Electric pressure washers must always be hooked into a GFCI ground outlet while they are in use. This is a must because to the significant amount of power that they consume. You want it to trip before it has the opportunity to burn up the wiring in your home, and you also need it to have a ground.
Make sure the nozzle is properly fastened, otherwise it can come loose and cause someone to be hurt or damaged. To do this, first ensure that it is fastened properly, and then perform a test spray on some scrap glass before moving on to the actual windows. You shouldn’t have any problems as long as the item has a snug fit and you can’t take it off by tugging on it.
When using a pressure washer, be careful to keep children and animals away from the area. Make sure that your children and pets are not in the area while you are spraying so that you are not putting them in danger by taking unnecessary risks.
You are working with a piece of equipment that has the potential to cause injuries, even if they are the result of an unexpected event that occurs without any prior warning.
Put on safety goggles (and gloves, if they’re available), since this will guarantee that you stay safe. Wearing safety eyewear is a bare minimum requirement when using a power washer since there is the potential for debris to fly in your direction. Gloves and gear that is waterproof are two additional items that may make the task far more pleasant.
Is It Risky to Use a Pressure Washer to Clean Windows?
This is something that is dependent on the condition of your window frames and the windows themselves. You won’t most likely find any problems if everything is in good form and functioning as it should. On the other hand, you run the risk of causing more harm to your house if any portion of the windows is broken or if the caulk is missing.