How to Repair a Coffee Pot Crack

How to Repair a Coffee Pot Crack

How to Repair a Coffee Pot Crack

It’s surprising how tough it may be for coffee connoisseurs to find a coffee pot that they love and that regularly creates wonderful cup of Joe. Once you’ve found one, it’s difficult to let go of it.

As a result, if your glass coffee pot breaks, it might be disastrous. Coffee aficionados sometimes avoid using more durable materials such as plastic because they believe it will have a detrimental influence on the taste of the coffee.


Consider not just how to repair a broken coffee pot, but also how to prevent cracks from forming in the first place.



What is the source of coffee pot cracking?

Aside from apparent incidents, there are a variety of additional factors that might cause coffee pots to fracture. Dramatic and rapid variations in temperature are among the most prevalent. Try not to rinse your coffee pot with cold water or put ice cubes into it if your coffee pot is still full of hot liquid. It has the potential to break.



Additionally, with time, friction and force (typically caused by regular wear and tear) may cause glass to break. Unfortunately, the sort of glass used in the majority of coffee pots is not intended to survive indefinitely.

Whether it’s the warmth of the water or the power with which the washing cycle is performed, dishwashers are legendary crime sites when it comes to broken coffee pots. Always wash your coffee pot by hand.



How to repair a broken coffee maker

So, the coffee pot has already been shattered, what do you do now? You may attempt a variety of different approaches to have it fixed.

Using glue to repair a broken coffee pot
The initial step is to attempt to glue the crack shut.



When using this strategy, you will encounter two major difficulties. For starters, it’s possible that the adhesive won’t be efficient in preventing the fracture. Superglue, gorilla glue, or another super-strong form of glue should be used without a doubt. However, even in this case, coffee may be able to leak through through microscopic cracks that the glue was unable to cover.



In order to test it, fill the pot halfway with cold water, fully dry the exterior with a towel, and then place the pot on a paper towel. If the paper towel remains dry, it is likely that the glue has done its job.



Even if you are successful in entirely sealing the gap with adhesive, the glue may melt if hot coffee is poured to the pot while the crack is being sealed. If this occurs, the best-case situation is that the coffee begins to spill once again. Alternatively, the melting glue might leak into the coffee itself, ruining the flavor or, even more dangerously, becoming toxic.

Make careful you use heatproof, non-melting adhesive to prevent this second snare. In addition, a food-safe brand such as Loctite Glass Glue is usually a good option.

Using sealant to repair a damaged coffee pot

Instead of using glue, you might attempt to repair the coffee pot by applying another sort of sealant around the fracture. You may purchase silicone sealant or other forms of sealant. These products may be found at a home improvement or hardware shop. In other cases, they take the shape of a simple patch that may be applied to the pot.



The same precautions and warnings that apply to conventional glue will apply to sealant as well: It is possible that it will not entirely seal the break and will wind up melting and spilling into the coffee.

Purchase something to wrap around the exterior of the house.

Alternatively, you may purchase extra material to wrap around the exterior of the broken coffee pot, thus acting as a jacket to keep the coffee in. If you’ve broken a carafe or a French press rather than a regular pot for a coffee machine, this will be more effective.



Replace the pot with another one.

If you have a classic coffee maker and have broken the coffee pot, the approach described above is unlikely to work. You may, on the other hand, replace just the pot and retain the remainder of the machine. Replacement pots are available from most brands and may be purchased online via their websites, Amazon, or other large retailers.



This is also a more ecologically responsible alternative since it reduces waste by not disposing of the complete device. If your pot is made of glass, be sure you recycle it.

Purchase a new piece of equipment.

If everything else fails, you may have to purchase a whole new coffee maker. Inquire as to whether the model that you now possess and like is still being produced. Chances are that you will not be required to cope with change at all.



If this is the case, and you must get a whole new model, attempt to choose one that is more durable. As previously said, plastic is not a good choice since it might have a bad influence on the flavor.




Look for tougher materials such as glass or stainless steel. Stainless steel is highly regarded by many individuals.

Keeping coffee pots from breaking
Let’s go through a few pointers to prevent your coffee pot from breaking in the first place.

Mild soap and lukewarm water should be used to clean.
You shouldn’t wash it in the dishwasher.
Allow for full cooling of the coffee pot before cleaning it.
Keep the pot itself in a cupboard or away from high-traffic areas where it may be bumped or bashed.